Ultra-wide band (UWB) communications transmits a wide bandwidth signal with an extremely low power spectral density. This property of UWB makes it possible to co-exist with the current narrowband communication systems operating at dedicated frequency bands. Ultra-wide band can also serve multiple users by using the Spread Spectrum (SS) technique. However, with the number of multiple users increasing, signals associated with users will interfere with each other, resulting in Multi-Access Interference (MAI), a drawback in MA-UWB systems, which could adversely affect the system performance.
In practice, the exact transfer function of MA1 from other users is rarely known because of the security property of the SS system. Therefore it is difficult to represent the characteristics of MA1 by any statistical model. Lacking such information of MA1 would cause imprecision to the signal model, which could adversely degrade the performance of UWB communications.
Fuzzy logic is a conceptually simple, flexible and effective way to handle the imprecision of the signal model. In this thesis, fuzzy detection techniques are investigated in solving the problem of MA1 in Multiple-Access (MA) UWB communication system. In chapter 2, signal detection of MA-UWB using fuzzy integration has been presented. Fuzzy Integration (FI) detector, by mapping the input vectors of detector to a fuzzy space using a fuzzy membership function, would alleviate the performance degradation due to MAI. This chapter also illustrates that the FI detector has a very simple hardware design, and it can be applied into practical systems directly.
In chapter 3, a signal detection method for MA-UWB using Fuzzy Inference system (FIS) is presented. This FIS detector modifies the fuzzy space of the FI detector and further improves the detection performance of UWB communication systems. The enhancement in performance after applying the FIS detector is also illustrated in this chapter. Result has indicated that a significant performance improvement could be obtained by using the FIS detector.
Multistage interference cancellation (PIC) is one of the common multi-user detection C techniques, and an effective method to cancel the MA1 from other users within the same communication network. The principle of the PIC is to estimate the signal of interfering users, and then subtract the estimated interference from the received signal. This approach can be further iterated by using larger number of stages.
The effectiveness of the PIC, however, is related to, and is sensitive to the reliability of the decision involving the interference estimation process. The performance of PIC could therefore be severely degraded if the interference estimation is not reliable, resulting in non-robustness in the PIC. A fuzzy PIC detector for MA-UWB application is developed in order to address this problem in chapter 4. This fuzzy PIC detection estimates the reliability of the signals and assigns a cancellation weight to each interference cancellation path to minimize the error. The cancellation weight is chosen depending on the reliability of the received signal. The concept of this fuzzy PIC detection is discussed and the performance of this detector is also presented in chapter 4.
In chapter 5, a general discussion in these three detectors, i.e FI, FPIC, and FIS is presented. This chapter also concludes the use of fuzzy detection techniques in UWB communications and summarizes the detection performance of the fuzzy detection techniques by comparing with the conventional approaches.
Source: City University of Hong Kong
Author: Chow, Kam Ming