List of Simple 80+ Power Electronics Matlab Simulink Projects for Final Year EEE Students with PDF Downloads. This article also Contains Power Electronics Mini Projects, IEEE Base Abstracts for Electrical Engineering Students.
Power Electronics Projects using Matlab:
- Embedded Implementation of VHR Satellite Image Segmentation
Processing and analysis of Very High Resolution (VHR) satellite images provide a mass of crucial information, which can be used… - Development of Electronics, Software, and Graphical User Control Interface for a Wall-climbing Robot
The objective for this project is to investigate various electrical and software means of control to support and advance the development… - Use of the Genetic Algorithm-based Fuzzy Logic Controller for Load-Frequency Control in a Two Area Interconnected Power System
The use of renewable energy resources has created some problems for power systems. One of the most important of these is load frequency control (LFC). In this study, in order to solve the LFC problem, modern control methods were applied… - Real Time MATLAB Interface for Speed Control of Induction Motor Drive using dsPIC 30F4011
This paper presents design and implementation of Real time MATLAB Interface for speed control of induction motor drive using dsPIC 30F4011. In recent years, the field oriented control of induction motor drive is widely used in high performance drive system…. - Decentralized Nonlinear Control for Power Systems using Normal Forms and Detailed Models
This paper proposes a decentralized method for nonlinear control of oscillatory dynamics in power systems. The method is applicable for ensuring both transient stability as well as small-signal stability. The method uses an optimal control law… - Fuel Cell Powered Vehicles Using Supercapacitors
The fuel cell powered vehicle is one of the most attractive candidates for the future due to its high efficiency and capability to use hydrogen as the fuel. However, its relatively poor dynamic response, high cost, and limited life time have impeded… - An Overview of Binary Arithmetic Architectures & Their Implementation in DSP Systems
Many branches of the electrical engineering industry involve applications that use digital signal processing. Almost any type of signal that comes in analog form, such as sound, video, and radio or microwaves, must use digital signal processing for implementation… - A Guide to Producing An A Cappella CD and Development of a Pitch Detection Program
An in-depth look at the steps required to produce a CD for an a cappella group. From what microphone and preamplifiers to use, to what steps to take during the editing, mixing, and mastering processes. Finished with a look at pitch detection algorithms… - Subwoofer Frequency Response Optimization by Means of Active Control
Most subwoofer systems have difficulties producing frequencies in the low end of the hearing spectrum due to the added power requirements and instabilities. Active controls can transform the audio signal without changing physical characteristics and ultimately… - Indoor Navigation Using Accelerometer and Magnetometer
This project will create a navigation system based on dead reckoning using an accelerometer and a magnetometer. There have previously been several studies made on navigation with accelerometers, magnetometers (electronic compass) and gyros… - Simulation of 3 Phase Induction Motor in MATLAB With Direct and Soft Starting Methods
Asynchronous machines are considered nowadays the most commonly used electrical machines, which are mainly used as electrical induction motors. Starting the induction motor is the most important and dangerous step. The theory behind this project… - Demonstration of a Low Cost C.O.T.S. Rendezvous Depth Sensor for Satellite Proximity Operations
With the quest to undertake ambitious tasks in space, proximity operations involving multiple spacecraft are expected to increase. A vital part of any proximity operation is the relative range and pose measurement between spacecraft and target… - Stereo Pi: Portable Digital Stereo Camera
Stereoscopy, a technique for creating the illusion of depth, has existed as early as the 1950s. With the ubiquity of smartphones, digital camera technologies has greatly advanced over the past decade. Although stereo cameras have existed for many years using film… - IROTS
The paper describes the design and verification of a river otter tracking system. The system consists of an implant and a base station. The implant periodically stores its latitude, longitude, and time of acquisition of aforementioned position coordinates… - Agribot: An Agriculture Robot
Agribot is a robot designed for agricultural purposes. As one of the trends of development on automation and intelligence of agricultural machinery in the 21st century, all kinds of agricultural robots have been researched and developed to implement… - Detection of Breathing and Infant Sleep Apnea
Sleep apnea is a condition where people pause while breathing in their sleep; this can be of great concern for infants and prematurebabies. Current monitoring systems either require physical attachment to a user or may be unreliable… - Sensor Less Control of Induction Machines, in Railway Applications
In this project, a sensor-less system has been developed for an induction machine in railway applications. The approach which was taken in this project thesis is a consequence of the expectations of the company: investigate the possibilities… - GISOO: A Virtual Testbed for Wireless Networked Control Systems
Networked control over wireless sensor and actuator networks is of growing importance in cyber-physical systems as in industrial process control and building management systems. The correct design of wireless communication solutions and control algorithms… - Tremor Quantification and Parameter Extraction
Tremor is a neuro degenerative disease causing involuntary muscle movements in human limbs. There are many types of tremor that are caused due to the damage of nerve cells that surrounds thalamus of the front brain chamber. It is hard to distinguish or classify… - Design of Pipelined Analog-to-Digital Converter with SI Technique in 65 nm CMOS Technology
Analog-to-digital converter (ADC) plays an important role in mixed signal processing systems. It serves as an interface between analog and digital signal processing systems. In the last two decades, circuits implemented… - Channel estimation in Mobile Wireless Systems
The demands of multimedia services from mobile user equipment (UE) for achieving high data rate, high capacity and reliable communication in modern mobile wireless systems are continually ever-growing. As a consequence, several technologies… - Image Processing Techniques using MATLAB
Image processing is the field of signal processing where both the input and output signals are images. Images can be thought of as two-dimensional signals via a matrix representation, and image processing can be understood as applying standard one-dimensional… - Aspects Of The Choice Of Sampling Frequency In The Control System Of A Gas Turbine
At Siemens, PLCs are used to control the gas turbines, and to execute the code in the plcs cyclic interrupts are used. If the execution time for the interrupt becomes close to the cyclic time of the interrupt the load of the PLC increases… - Combined Platform for Boost Guidance and Attitude Control for Sounding Rockets
This report handles the preliminary design of a control system that includes both attitude control and boost control functionality for sounding rockets. This is done to reduce the weight and volume for the control system. A sounding rocket is a small rocket… - Rapid Prototyping: Development and Evaluation of Field Oriented Control using LabView FPGA
This report describes the work of developing a rapid prototyping system for Permanent Magnet Synchronous Motors using LabView FPGA at ABB Corporate Research in Västerås. The aim of the rapid prototyping system is to serve as an additional tool… - High Level Model of IEEE 802.15.3c Standard and Implementation of a Suitable FFT on ASIC
A high level model of HSIPHY mode of IEEE 802.15.3c standard has been constructed in Matlab to optimize the wordlength to achieve a specific bit error rate (BER) depending on the application, and later an FFT has been implemented… - Deblurring Algorithms for Out-of-focus Infrared Images
An image that has been subject to the out-of-focus phenomenon has reduced sharpness, contrast and level of detail depending on the amount of defocus. To restore out-of-focused images is a complex task due to the information loss that occurs… - Expansion of Dynamic Simulation Model for a Distributed Generator Unintentional Islanding Detection Scheme
The interconnection of distributed resources requires specific voltage regulation, monitoring, protective relaying, power quality, and islanding detection. For this reason IEEE established standard IEEE 1547 that ensures the compliance with such requirements… - Collision Mitigation System: Pedestrian Test Target
Daimler Trucks North America is creating an advanced emergency braking system which uses radar sensors that detect pedestrians and automatically applies the brakes to bring the vehicle to a stop. To improve and validate their technology, they need a mechanical… - Low Power System Design for Emerging Pervasive Platform
Personal computing devices have gone through more than four decades of evolution. The form factor of computing devices has gone down dramatically, while computation workload for each computing device has increased significantly… - Evaluation of Direct Torque Control Using Space Vector Modulation for Electric Vehicle Applications
This paper presents the results of an investigation into the suitability of a Direct Torque Control method for an electric vehicle application. For this investigation, a 2.2kW specially rewound induction motor driven using a three-level IGBT inverter… - Performance Analysis of Conjugate Gradient Algorithms Applied to the Neuro-Fuzzy Feedback Linearization-based Adaptive Control Paradigm for Multiple HVDC Links in AC/DC Power System
The existing literature predominantly concentrates on the utilization of the gradient descent algorithm for control systems design in power systems for stability enhancement. In this paper, various flavors of the Conjugate Gradient (CG) algorithm have been… - A Predictive Power Control Strategy for DFIGs based on a Wind Energy Converter System
A feasible control strategy is proposed to control a doubly fed induction generator based on the wind energy converter system (DFIG-WECS). The main aim is to enhance the steady state and dynamic performance under the condition of the parameter perturbations… - Integral Plus Resonant Sliding Mode Direct Power Control for VSC-HVDC Systems under Unbalanced Grid Voltage Conditions
An integral plus resonant sliding mode direct power control (IRSMC DPC) strategy for voltage source converter high voltage direct current (VSC-HVDC) systems under unbalanced grid voltage conditions is proposed in this paper. Through detailed… - DC-Link Capacitor Voltage Regulation for Three-Phase Three-Level Inverter-based Shunt Active Power Filter with Inverted Error Deviation Control
A new control technique known as inverted error deviation (IED) control is incorporated into the main DC-link capacitor voltage regulation algorithm of a three-level neutral-point diode clamped (NPC) inverter-based shunt active power filter… - Physical Design Methodologies for Low Power and Reliable 3D ICs
As the semiconductor industry struggles to maintain its momentum down the path following the Moore’s Law, three dimensional integrated circuit (3D IC) technology has emerged as a promising solution to achieve higher integration density, better performance… - Microcontroller Design of a Bidirectional Three-Level Pulse Width Modulation AC/DC Converter for Vehicle-to-Grid Application
Bidirectional chargers provide plug-in electric vehicles (EV) the ability to not only transfer energy from the grid to the vehicle, but also transfer energy from the vehicle to the grid (V2G). The V2G mode allows power utility companies… - The Quickie Composer Android Application
The Quickie Composer application is a program intended for use on Android Devices. Designed for the composer on the go, the Quickie Composer app is perfect for those “in the moment” compositions. In the following document, the functionality… - Techniques, Taxonomy, and Challenges of Privacy Protection in the Smart Grid
As the ease with which any data are collected and transmitted increases, more privacy concerns arise leading to an increasing need to protect and preserve it. Much of the recent high-profile coverage of data mishandling and public mis-leadings… - Neuro-Fuzzy Wavelet based Adaptive MPPT Algorithm for Photovoltaic Systems
An intelligent control of photovoltaics is necessary to ensure fast response and high efficiency under different weather conditions. This is often arduous to accomplish using traditional linear controllers, as photovoltaic systems are nonlinear… - Virtual Inertia Control-based Model Predictive Control for Microgrid Frequency Stabilization Considering High Renewable Energy Integration
Renewable energy sources (RESs), such as wind and solar generations, equip inverters to connect to the microgrids. These inverters do not have any rotating mass, thus lowering the overall system inertia. This low system inertia issue could affect… - Control Strategy for a Grid-Connected Inverter under Unbalanced Network Conditions—A Disturbance Observer-based Decoupled Current Approach
This paper proposes a new approach on the novel current control strategy for grid-tied voltage-source inverters (VSIs) with circumstances of asymmetrical voltage conditions. A standard grid-connected inverter (GCI) allows the degree of freedom to integrate… - Acceleration Slip Regulation Strategy for Distributed Drive Electric Vehicles with Independent Front Axle Drive Motors
This paper presents an acceleration slip regulation strategy for distributed drive electric vehicles with two motors on the front axle. The tasks of the strategy include controlling the slip ratio to make full use of the road grip and controlling the yaw rate… - Experiment on Bidirectional Single Phase Converter Applying Model Predictive Current Controller
A bidirectional converter able to manage storage is a basic power electronics device, and it is a major component of renewable energy sources, micro grid and also the smart grid concept. In this paper, single-phase bidirectional converter… - A Comparative Reliability Study of Three Fundamental Multilevel Inverters using Two Different Approaches
The reliability of power electronic devices and components is very important to manufacturers. In recent years, many researchers have conducted reliability assessments of power electronic devices, yet the reliability of numerous circuits used widely… - Optimized Endpoint Delivery via Unmanned Aerial Vehicles
Unmanned Aerial Vehicles (UAVs) are remotely piloted aircraft with a range of varying applications. Though early adoption of UAVs focused on military applications, surveillance, photography, and agricultural applications are presently on the rise… - Performance and Robustness Analysis of Co-Prime and Nested Sampling
Coprime and nested sampling are well known deterministic sampling techniques that operate at rates significantly lower than the Nyquist rate, and yet allow perfect reconstruction of the spectra of wide sense stationary signals. However, theoretical… - Methods for Calibration of the Vibration Measurement System EVME Used on the JAS 39 Gripen Engine
This project investigates methods for calibrating and functional testing an Engine Vibration Measurement Equipment. The equipment uses accelerometers to measure vibrations on the JAS 39 Gripen aircraft engine to ensure that the engine… - Radar Target Modelling Based on RCS Measurements
When simulating target seekers, there is a great need for computationally efficient, target models. This report considers a study of radar target modelling based on Inverse Synthetic Aperture Radar (ISAR) measurements of generic aircraft… - Compensating for Respiratory Artifacts in Blood Pressure Waveforms
Cardiac catheterization has for a long time been a valuable way to evaluate the hemodynamics of a patient. One of the benefits is that the entire blood pressure waveform can be recorded and visualized to the cardiologist. These measurements are however disturbed… - Control Oriented Modeling of the Dynamics in a Catalytic Converter
The legal amount of emissions that vehicles with spark ignited engines are allowed to produce are steadily reduced over time. To meet future emission requirements it is desirable to make the catalytic converter work in a more efficient way… - Wind and Solar Power Integration in Electricity Markets and Distribution Networks through Service-Centric Virtual Power Plants
A virtual power plant (VPP) is formulated and developed as a service-centric aggregator that enables the market integration of distributed energy resources and simultaneously supports co-operation with the distribution system operator… - Derivative-Free Kalman Filtering based Approaches to Dynamic State Estimation for Power Systems with unknown Inputs
This paper proposes a decentralized derivative-free dynamic state estimation method in the context of a power system with unknown inputs, to address cases when system linearisation is cumbersome or impossible. The suggested algorithm tackles situations… - Laboratory Education of Modern Power Systems using PHIL Simulation
Power Hardware-In-the-Loop (PHIL) simulation, allows the connection of a physical power component (e.g. Photovoltaic (PV) inverter) to a real-time simulated network. In this paper PHIL simulation is used for laboratory education in a systematic… - PMU Data Buffering for Power System State Estimators
State estimation (SE) is a critical must run successful unit within energy management system software. This is dictated by the high reliability requirements for system security and control and the need to represent the closest real-time… - Spectral-Energy Efficiency Tradeoff in Relay-Aided Massive MIMO Cellular Networks With Pilot Contamination
This paper concerns with a relay-aided massive multiple input multiple output (MIMO) cellular network. The exact closed-form expressions of both spectral efficiency (SE) and energy efficiency (EE) are obtained for downlink single-cell… - Development of Mobile-based Hand Vein Biometrics for Global Health Patient Identification
For many health services in developing countries, patient identification is a fundamental need. In countries where no standard form of identification is available, this problem is exacerbated by a lack of literacy and also frequent… - GPU-Accelerated Multivariate Empirical Mode Decomposition for Massive Neural Data Processing
This paper presents an efficient implementation of multivariate empirical mode decomposition (MEMD) algorithm, a multivariate extension of EMD algorithm. Analogous to EMD, MEMD decomposes a multivariate signal into its intrinsic mode functions… - Towards Optimization of Metaheuristic Algorithms for IoT Enabled Smart Homes Targeting Balanced Demand and Supply of Energy
Internet of Things (IoT) enabled Smart grid (SG) is one of the most advanced technologies, which plays a key role in maintaining a balance between demand and supply by implementing demand response (DR) program. In SG, the main focus of the… - Secrecy Capacity Analysis Over κ – μ Fading Channels: Theory and Applications
In this paper, we consider the transmission of confidential information over a κ–μ fading channel in the presence of an eavesdropper who also experiences κ–μ fading. In particular, we obtain novel analytical solutions for the probability… - Novel Three Phase Multi-Level Inverter Topology with Symmetrical DC-Voltage Sources
A novel three phase modular multilevel inverter (MMLI) is proposed. The proposed inverter consists of primary cell and repetitive modular cells which are connected in series arrangement with the primary cell. Therefore, the proposed topology… - A Three Phase Hybrid Cascaded Modular Multilevel Inverter for Renewable Energy Environment
A three phase hybrid cascaded modular multilevel inverter topology which is derived from a proposed modified H-bridge (MHB) module. This topology results in the reduction of number of power switches, losses, installation area, voltage stress and converter… - Decentralized Multi-Agent System-based Cooperative Frequency Control for Autonomous Microgrids with Communication Constraints
Based on power line carrier communication technology, a decentralized multi-agent system (DMAS)-based frequency control strategy is proposed and investigated in this study on an autonomous micro grid with communication constraints… - Parameter Estimation of Asymmetrical Six-Phase Induction Machines using Modified Standard Tests
In multiphase machine drives, accuracy of the estimated machine parameters is crucial for effective performance prediction and/or control. While a great amount of work has been done on parameter estimation for three-phase machines… - Towards a 3 – D Technique to Determine the Geometric Path of Electric Current Flow Through a Contact System
The effective conductivity of a contact system is an important characteristic used to link the micro structure of the contact system to its performance. A resistor network model has been developed from the cross-sectional slices of a given electrical… - A Multi – Layer Parametric Approach to Maximize the Access Probability of Mobile Networks
Next-generation mobile networks (5G) are defined to provide access in the framework of heterogeneous systems where it is crucial to have ‘‘always on’’ and ‘‘everywhere connectivity’’ capabilities. This is of fundamental importance even in 4G mobile systems… - Partial Discharge Behavior Under Operational and Anomalous Conditions in HVDC Systems
Power cables undergo various types of over stressing conditions during their operation that influence the integrity of their insulation systems. This causes accelerated ageing and might lead to their premature failure in severe cases… - Predicting Lifetime of Thick Al Wire Bonds using Signals Obtained From Ultrasonic Generator
Routine monitoring of the wire bonding process requires real-time evaluation and control of wire bond quality. In this paper, we present a nondestructive technique for detecting bond quality by the application of a semi supervised… - Grid-Connected PV-Wind-Battery based Multi-Input Transformer Coupled Bidirectional DC-DC Converter for household Applications
A control strategy for power flow management of a grid-connected hybrid PV-wind-battery based system with an efficient multi-input transformer coupled bidirectional dc-dc converter is presented. The proposed system aims to satisfy… - Design and Real-Time Controller Implementation for a Battery-Ultra-capacitor Hybrid Energy Storage System
Two real-time energy management strategies have been investigated for optimal current split between batteries and ultra capacitors (UCs) in electric vehicle (EV) applications. In the first strategy, an optimization problem is formulated… - Control and Implementation of a Standalone Solar Photo-Voltaic Hybrid System
A control algorithm for a standalone solar photovoltaic (PV) diesel-battery hybrid system is implemented in this paper. The proposed system deals with the intermittent provides power quality improvement. The PV array is integrated with a DC-DC… - A Medium Frequency Transformer-Based Wind Energy Conversion System Used for Current Source Converter Based Offshore Wind Farm
Offshore wind farms with series-interconnected structures are promising configurations because bulky and costly offshore substations can be eliminated. In this work, a medium-frequency transformer (MFT)-based wind energy conversion… - Low Power System Design for Emerging Pervasive Platform
Personal computing devices have gone through more than four decades of evolution. The form factor of computing devices has gone down dramatically, while computation workload for each computing device has increased significantly… - Applications of one-cycle control to improve the interconnection of a solid oxide fuel cell and electric power system with a dynamic load
Adding distributed generation (DG) is a desirable strategy for providing highly efficient and environmentally benign services for electric power, heating, and cooling. The interface between a solid oxide fuel cell (SOFC), typical loads, and the electrical… - Development of Electronics, Software, and Graphical User Control Interface for a Wall-climbing Robot
The objective for this project is to investigate various electrical and software means of control to support and advance the development of a novel vacuum adhesion system for a wall-climbing robot. The design and implementation of custom electronics… - Multi Disciplinary Modeling, Control, and Optimization of a Solid Oxide Fuel Cell/Gas Turbine Hybrid Power System
This thesis describes a systematical study, including multidisciplinary modeling, simulation, control, and optimization, of a fuel cell–gas turbine hybrid power system that aims to increase the system efficiency and decrease the energy… - Research on the use of Matlab in the Modeling of 3-phase Power Systems
This paper describes the modeling and simulation library for power systems si1mulation under SIMULINK environment. The different features of MATLAB Toolboxes used in the analysis of power systems are described. Software introduces SIMULINK environment… - Power Quality Improvement in 3-φ Power System Using Shunt Active Filter with Synchronous Detection Method
Active filters with synchronous detection methodologies are vividly employed in distribution system to make sure that the harmonics generated by non-linear loads is reduced and results in less voltage distortion and leads to lesser power superiority problems… - A Minimally Invasive 64-Channel Wireless μECoG Implant
Emerging applications in brain–machine interface systems require high-resolution, chronic multisite cortical recordings, which cannot be obtained with existing technologies due to high power consumption, high invasiveness, or inability… - Automatic Aligning Free Space Communication Platform
Recent developments in ultra-dense optical components coupled with micro-scale electro-mechanical systems have led to the ability to create a new type of optical device: the free-space self-aligning optical transmitter/receiver… - Mobility in Wireless Sensor Networks
The combination of mobility with wireless networks greatly expands the application space of both robots and distributed sensor networks; such a pervasive system can enable seamless integration between the digital and physical worlds… - Grid Synchronization of a Seven-Phase Wind Electric Generator using d-q PLL
The evolving multiphase induction generators (MPIGs) with more than three phases are receiving prominence in high power generation systems. This paper aims at the development of a comprehensive model of the wind turbine driven seven-phase… - Autonomous Brain-Controlled Functional Electrical Stimulation for Grasp and Release in Complete Cervical Spinal Cord Injury
There are over 33,000 people in the United States living with complete tetraplegia due to traumatic spinal cord injury (SCI). These individuals rely heavily on family and caregivers as they are unable to perform many activities of daily… - Performance and Robustness Analysis of Co-Prime and Nested Sampling
Coprime and nested sampling are well known deterministic sampling techniques that operate at rates significantly lower than the Nyquist rate, and yet allow perfect reconstruction of the spectra of wide sense stationary signals… - Coordinated Control Strategies for a Permanent Magnet Synchronous Generator based Wind Energy Conversion System
In this paper, a novel co-ordinated hybrid maximum power point tracking (MPPT)-pitch angle based on a radial basis function network (RBFN) is proposed for a variable speed variable pitch wind turbine. The proposed controller is used to maximize output… - Grid Synchronization of a Seven-Phase Wind Electric Generator using d-q PLL
The evolving multiphase induction generators (MPIGs) with more than three phases are receiving prominence in high power generation systems. This paper aims at the development of a comprehensive model of the wind turbine driven… - A Low-cost Real Color Picker Based on Arduino
Color measurements have traditionally been linked to expensive and difficult to handle equipment. The set of mathematical transformations that are needed to transfer a color that we observe in any object that doesn’t emit its own light… - Robust Design of Docking Hoop for Recovery of Autonomous Underwater Vehicle with Experimental Results
Control systems prototyping is usually constrained by model complexity, embedded system configurations, and interface testing. The proposed control system prototyping of a remotely-operated vehicle (ROV) with a docking hoop…
More >> Matlab Projects based on Power Systems for Final Year Students
More >> Power Electronics Matlab Simulink Projects for Final Year EEE Students