This study has been conducted as a Minor Field Study (MFS) and focuses on the electrification process of Rayal, a remote village in the Far Western Development Region of Nepal. The purpose of the study was to Continue reading
Get Latest Final Year Projects in your Email
Tag: Thermodynamics
District Cooling for AlHamra Village in RasAlKhaimah-United Arab Emirates (UAE) (Mechanical Project)
In this thesis, the feasibility of a solar assisted district cooling system for the Al Hamra village(phase 4) under RAK weather conditions is assessed. Utilizing solar energy is very attractive since Continue reading
Effect of Nanofluids on Thermal Performance of Heat Pipes (Mechanical Project)
A relatively new way for utilizing the thermal performance of heat pipes is to use nanofluids as working fluids in the heat pipes. Heat pipes are effective heat transfer devices in which the nanofluid operates in the two phases, evaporation and Continue reading
Implementation of Solar Thermal Energy in a Small Residential Area: Case Study Kanalstaden (Mechanical Project)
This study investigates the feasibility of installing solar thermal energy systems on small residential districts and the practical issues that can arise. A residential district, planned to Continue reading
Behaviour of a SPD Switchable Glazing in an Outdoor Test Cell With Heat Removal Under Varying Weather Conditions (Mechanical Project)
ABSTRACT:
Suspended particle device (SPD) switch able glazing has potential to control transmission of solar radiation in the visible range by changing its transparency from 55% to 5%. Out door test cell Continue reading
Test Turbine Measurements and Comparison with Meanline and Throughflow Calculations (Mechanical Project)
This study is a collaboration between Siemens Industrial Turbomachinery(SIT) and Royal Institute of Technology(KTH). It is aimed to study and compare the outputs of two different Continue reading
A Highly Precise and Linear IC for Heat Pulse based Thermal Bidirectional Mass Flow Sensor (Electronics Project)
In this work we have designed and simulated a thermal bi-directional integrated circuit mass flow sensor. The approach used here was an extension to the gas flow model given Continue reading
Elasto-hydrodynamic Lubrication in Spur Gear and Helical Gear Contacts (Mechanical Project)
The gears in a transmission are lubricated to prevent their premature failure as a result of pitting and wear on the tooth surfaces. Furthermore, the lubricant also limits the rise in surface temperature of Continue reading
Effective Use of Excess Heat in a Cement Plant (Mechanical Project)
The report investigates the feasibility of accessing waste heat at kiln 7 in the Cementa AB cement plant in Slite, Gotland. The background is provided, with a description of the Continue reading
Simulation of Thermal Stresses in a Disc Brake (Mechanical Project)
The heat flux produced from the friction between a disc and pad system leads to a high temperature which causes thermal stresses in the disc and after a number of repeated Continue reading
Study of Temperature Raise in Gavleån River related to District Cooling (Mechanical Project)
This project is a preliminary study in order to build a small power plant, located beside to Gavleån River. It has been designed with the aim of cooling a district of Continue reading
District heating to replace an Electrical Installation (Mechanical Project)
This project has been developed at the company Gavlegardarna. The company owns a large part of the buildings of Gävle and two of them are the objective of the project. Gavlegardana is highly concerned about the Continue reading