Design and Simulation of Interconnected H-Bridge Inverter (Electrical Project)

Get this Project:

Fields with * are mandatory

In this project, the research, design and simulation of an interconnected H-bridge single-phase inverter was explored. The inverter design was divided into three separate sections. First, a VHDL programmed CPLD was used to generate control signals for the transistors of the inverter circuit.

Second, power electronics was used to create an inverter circuit to change a DC input to a 60 Hz AC output. Lastly, additional circuits were used to link the generated control signals to the MOSFET transistors of the inverter circuit. The operation of the three components was then validated with computer simulations. Results of computer simulation demonstrate the operation of the proposed single-phase inverter. Recommendations for building the hardware prototype of the proposed inverter will be presented in this report.
Source: California Polytechnic State University
Authors: Samuel Muehleck

Download Project

Get this Project:

Fields with * are mandatory

Leave a Comment

Your email address will not be published. Required fields are marked *