In this project an automated greenhouse was built with the purpose of investigating the watering system’s reliability and if a desired range of temperatures can be maintained.
The micro controller used to create the automated greenhouse was an Arduino UNO. This project utilizes two different sensors, a soil moisture sensor and a temperature sensor. The sensors are controlling the two actuators which are a heating fan and a pump.
The heating fan is used to change the temperature and the pump is used to water the plant. The watering system and the temperature control system was tested both separately and together. The result showed that the temperature could be maintained in the desired range. Results from the soil moisture sensor were uneven and therefore interpret as unreliable.
Authors: Attalla, Daniela | Tannfelt Wu, Jennifer